shielded power inductor xal1513-153 document 1027-1 document 1027-1 revised 07/27/16 inductance 2 dcr (mohms) 3 srf typ 4 i sat 5 i rms (a) 6 part number 1 20% (h) typ max (mhz) (a) 20c rise 40c rise xal1513-153me_ 15 6.8 7.5 8.0 25.5 16 22 core material composite core and winding loss go to online calculator environmental rohs compliant, halogen free terminations rohs compliant tin-silver over copper. other terminations available at additional cost. weight 18.7 g ambient temperature C40c to +125c with (40c rise) i rms current. maximum part temperature +165c (ambient + temp rise). derating . storage temperature component: C40c to +165c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 100/13 reel plastic tape: 32 mm wide, 0.35 mm thick, 24 mm pocket spacing, 13.26 mm pocket depth. pcb washing tested to mil-std-202 method 215 plus an additional aqueous wash. see doc787_pcb_washing.pdf . ? high current; very low dcr ? aec-q200 grade 1 qualifed (C40c to +125c ambient) ? soft saturation makes them ideal for vrm/vrd applications. i rms testing i rms testing was performed on 0.75 inch wide 0.25 inch thick copper traces in still air. temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. therefore temperature rise should be verifed in application conditions. 1. when ordering, please specify packaging code: xal1513-153me d packaging: d = 13 machine-ready reel. eia-481 embossed plastic tape (100 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter d instead. 2. inductance tested at 100 khz, 0.1 vrms, 0 adc. 3. dcr measured on a micro-ohmmeter. 4. srf measured using agilent/hp 4395a or equivalent. 5. dc current at 25c that causes an inductance drop of 30% (typ) from its value without current. click for temperature derating information . 6. current that causes the specifed temperature rise from 25c ambient. this information is for reference only and does not represent absolute maximum ratings. click for temperature derating information . 7. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2016 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
shielded power inductor C xal1513-153 document 1027-2 l vs frequency l vs current document 1027-2 revised 0727/16 0 current (a) inductance (h) 51 01 52 0 25 35 30 0 4 8 12 20 16 15 h 1 10 100 inductance (h) 0.1 1 100 10 frequenc y (mhz) 15 h 0.512 13,0 max 0.638 0.008 16,2 0,2 0.598 0.008 15,2 0,2 xxx r ecommended land p attern inches mm dimensions are in 0.118 0.004 3,00 0,10 0.125 3,18 0.417 10,6 0.520 13,2 0.299 0.010 7,6 0,254 dash n umber 0.492 12,5 ty p 0.0197 0,50 indicates or ientation of ter minations f or optional tin-lead and tin-silv er- copper ter minations , dimensions are f or the mounted par t. dimensions bef ore mounting can be an additional 0.005 inch / 0.13 mm. * * us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2016 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
|
